Quickly Painting to 3-Color Minimum
My idea was to let the base coats do much of the grunt work I find so difficult on large, flat spaces; that is, blending effects. This was accomplished by using four spray coats from different angles.
I used black as the primary base, followed by silver, then yellow from a few different directions and brown from underneath, spraying occasionally from a 45 degree angle for some bleed over.
The doors were easy. I popped out two, hit them from the top, not spraying all the way down, then turned the model and did two more doors.
The paints I used.
At that point, it was a matter of doing the details, but I didn't kill myself trying to reinvent the wheel. I basically cleaned up some spots and blocked out some black areas for contrast.
I got a bit happy, putting together this model and painting him up.
That's about it, really. Thoughts?
"If there is one thing we here at Privateer Press pride ourselves on, it's listening to our audience. You guys and gals have been d...
For better or worse, here's the updated Storm Raven.
On Friday we our event kicked off in earnest, and each participant has three games to play at 1000 points in the month of December. I, as t...
So after a few weeks of downtime I finally uncollapsed the collapsible table and started work on the hobby again. It's fair to say Str...